Picture Control
Picture Control
You can select the type of picture which best con'esponds to your viewing requirements.
Changing the Picture Standard
Press the MENU button. Press the 4 or p, button to select "Picture",
then press the ENTER _ button.
Press the A or v button to select "Mode", then press the ENTER _ button.
Press the _, or v button again to select "Mode", then press the
ENTER _ button.
Press the A or v button to select the desired picture mode (Dynamic,
Standard, Movie, Custom), then press the ENTERC_ button.
Select "Return" by pressing the A or v button, then press the
ENTER _ button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the P.MODE button on the remote control
repeatedly to select the desired picture mode.
/_M_g" "_ &MODE STILL P,$1ZE
..... 8R$ DNle
CC] _ EC] _
AUTOPRO_ ADD/DI:_ CAPtiON '
CZ3 CZ_ CZ? _
Choose "Dynamic" for viewing the TV during the day or when there is a bright
light in the room.
Choose "Standard" for the standard factory settings.
Choose "Movie" when viewing the movie.
Choose "Custom" if you want to adjust the settings according to personal
preference (see "Customizing the Picture Settings", page 41).
English-40
To Next Page
Loading...
