Installing the Wall Mount Kit (LN-S4095D)
This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
This LCD TV accepts a 200 mm x 200 mm VESA compliant mounting interface pad.
Components (So!d separate!y)
M6 X L14 M4 X L20
O Wall-Bracket O Set-Bracket O Screw: 8 EA O WoodScrew:7EA OAnchor: 7 EA O Screw: 3 EA Q InstallationGuide
@ Mark the location on the wall where the hole will be drilled.
% Make over 35 mm-depth-hole on the marked location using drill.
(37Fix anchors O on each hole on the wall.
,_47Connect wall-bracket O to the wall with wood screws tD after fitting anchors O into the wall-bracket O.
Note: If the bracket is not firmly fixed to the wall, the LCD TV may fall.
2 @ Turn the power off and unplug the power cord from the outlet.
(2) Place the TV face down on a soft cloth or cushion on a table.
5")Attach the set-bracket O onto the rear side of the TV set and secure the screws 0.
@ --- @
3 (b" Insert three Hangers of the set-bracketO into the grooves of the wall-bracketO.
@ Fix set-bracket • and wall-bracket O with screws O.
Note: Before installing the TV on the wall, first connect the cables.
®
English-85
To Next Page
Loading...
