Assigning Names to External Input Mode
This tbature enables you to name the input source you have connected.
Press the MENU button. Press the ENTER(:_ button to select "Input".
Pressthe,.or-,buttontose.ect"EditName".thenpressthe
ENTER _ button.
Press the ,,, or v button to select a signal source to edit, then press
the ENTER _ button.
Press the .A. or v button to select the external device : VCR, DVD,
D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver,
DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD Recorder, PC,
Internet TV Recv., Interactive TV Recv., VOD (Video On Demand) STB, TV.
Press the ENTER _ button.
Set other signal sources (AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2) using the same method as listed above.
Select "Return" by pressing the ,,, or "_ button, then press the
ENTER_ button to return to the previous menu.
Press the EXIT button to exit.
English-33
To Next Page
Loading...
