Changing the Picture Size
Youcan selectthe picture sizewhich bestcorrespondsto yourviewingrequirements.
Press the MENU button. Press the _ or !_ button to select "Picture",
then press the ENTER Ci_ button.
Press the A or v button to select "Size", then press the
ENTER C_button.
Press the ,_ or ,v buttons to select the screen format you want, then
press the ENTER _ button.
Select "Return" by pressing the A or v button, then press the
ENTER_ button to return to the previous menu.
Press the EXIT button to exit.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Magnifies the size of the picture on screen.
Zoom2 : Magnifies the size of the picture more than "Zoom1".
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Alternate method
Press the P.SlZE button on the remote control
repeatedly to select one of the picture size settings.
AUTO PROG, ADOJD_L CAPTION
EZ3 EZ3 EZ3 _
OSET OR_T
:_ You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode.
>,_ When Double ( r'l'=l, [!] ) mode has been set in PIP, the Picture Size cannot be set.
>,- When watching a DTV's liD signal, you can use Wide Fit. Horizontal
zoom(Wide Fit) sets the optical picture format by expanding it both
horizontally and vertically. For example, you can reset the picture in
4:3 format to t6:9. Wide Fit does not support all external devices.
>" To maintain scale in the Wide Fit mode, portions of the picture on the
top and bottom will be cropped.
Io_oolio. ol
English-43
To Next Page
Loading...
