Memorizing Channels
Your TV can memorize and store all of the available channels tor both "off'air" (antenna) and cable channels.
Alter the available channels are memorized, use the CH ix and CH v buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps fl._rmemorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
Before your televiskm can begin memorizing the available channels, yon must specify the type of signal source that is connected
to the TV (i.e., an antenna or cable system).
Press the MENU button. Press the 4t or t_ button to select "Channel",
then press the ENTERt:_ button.
Pressthe,,or,-buttontose,ect"Antenna",thenpresstheENTER÷
........................................button. Press the A or ',v button to select "Air" or "Cable", then press the
ENTER_ button.
Press the .,_ or v button to select "Auto Program", then press the
ENTER_ button.
continued...
English-20
To Next Page
Loading...
