Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set Top Box or the
TVsource (broadcast or cable).
Setting the Signal Source
Press the MENU button.
_ Press the ENTER[:3_ button to select "Input".
Press the ,_. or "_ button to select "Source List", then press the
ENTER _ button.
Press the A or v button to select a signal source, then press the
ENTER _ button.
When you connect equipment to the TV, you can choose between the
following sets of jacks: "AVI", "S-Video1", "Component1", "Component2",
"PC", "HDMII", or "HDMI2" on the TV's rear panel, and "AV2", or
"S-Video2" on the TV's side panel.
Alternate method
Press the SOURCE button on the remote control
repeatedly to select an external signal source.
I
Onlyconnecteddevicescan be selected.
Beforeselectingan inputsource,makesurethecorrespondingexternaldeviceis connectedfirst.
:_ HDMIinputcanbeselectedonly whentheexternaldeviceisturnedon and connectedtotheTV.
English-32
To Next Page
Loading...
