Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Digital Audio System
TV Rear Panel
[
Optical Cable (Not supplied)
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
We recommend the use of cables with a Ferrite Core.
Connect an Optical Cable
between the "DIGITAL
AUDIO OUT (OPTICAL)"
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
"DIGITAL AUDIO OUT
(OPTICAL)" terminal:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system's volume control.
Connecting an Amplifier/DVD Home Theater
Amplifier/DVD Home Theater
TV Rear Panel
>- Each external input source device has a different back panel configuration.
_-- When connecting an external device, match the color of the connection terminal to the cable.
>- We recommend the use of cables with a Ferrite Core.
Connect Audio Cables
between the AV OUT
JR-AUDIO-L] on the TV
and AUDIO IN [R-AUDIO-L]
on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the "AV OUT
[R-AUDIO-L]" terminals:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
Amplifier's volume control.
English- 13
To Next Page
Loading...
