Samsung LN-S4095D - PC Display; Setting Up Your PC Software (Windows Only); Display Modes

To Next Page

To Previous Page

PC Display

Setting Up Your PC Software (Windows Only)

Setting Up Your PC Software (Based on Windows XP)

The Windows display settings tbr a typical computer are shown below. The actual screens on your PC will probably be different,

depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different,

the same basic set up information will apply in almost all cases. (If not, contact your computer manufitcturer or Samsung Dealer.)

1, First, click on "Control Panel" on the Windows start menu.

2, When the control panel window appears, click on "Appearance and Themes"

and a display dialog-box will appear.

3, When the control panel window appears, click on "Display" and a display

dialog-box will appear.

4, Navigate to the "Settings" tab on the display dialog-box.

The correct size setting (resolution)

Optimum: 1920 x 1080 pixels

If a vertical-frequency option exists on your display settings dialog box,

the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Display Modes

If the signal f}'om the system equals the standard signal mode. the screen is adjusted automatically. If the signal f}'om the system doesn't equal the standard

signal mode, adjust the mode by relerring to your videocard user guide: otherwise there may be no vide(). For the display modes listed below, the screen

image has been optimized during manubtctu_.