Labeling the Channels
Use this feature to assign an easy to remember label to analog chalmels (i.e., "CBS", "ESPN", "PBS2", CNN02", etc.) A label consists
of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear.
Press the MENU button. Press the 4 or _- button to select "Channel",
then press the ENTER C_ button.
Pressthe--or-.buttontose.ect"Channe.Manager".thenpressthe
........................................ENTER_ button. Press the A or v button to select "All", then press the
ENTER _ button.
Press the ,A/v/4 / _ button to select a channel, then
press the ENTERS' button and option
window will appear. Press the _,. or v button to select
"Name", then press the ENTER _ button.
Pressthe-,or"-buttontoselectaletter,anumberor
a blank. (Results in this sequence: A...Z, 0...9, +, -, *,/,
blank).
Press the _ or _ button to switch to the next field, which
will be selected. Select a second letter or digit by pressing
A or _ button, as above.
Repeat the process to select the last three digits. To erase
the assigned new name, press and hold the A or
button until a blank appears.
When you have finished, press the MENU button.
Select "Return" by pressing the ._. or _ button, then
press the ENTER _ button to return to the previous menu.
Press the EXff button to exit.
:_ If you add or delete a TV channel, the labeled channels will also be added
or deleted.
English-37
To Next Page
Loading...
