Press the ENTER _ button to return to "Mode".
Press the A or v button to select "Color Tone", then press the
ENTER _ button.
Press the ,,_ or v button to select a particular option (Cool2, Coo11, Normal,
Warm1, or Warm2), then press the ENTER_ button.
Resetting the Picture Settings to the Factory Defaults
To return the factory defaults, select "Reset" by pressing the .,L or v button.
Press the ENTER _ button.
Press the A or v button to select "OK" or "Cancel", then press the
ENTER _ button.
Select "Return" by pressing the ,_ or v button, then press the
ENTER _ button to return to the previous menu.
Press the EXIT button to exit.
If you set "Reset" to "OK", the previously adjusted settings will be
reset to the factory defaults.
::_ The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom).
English-42
To Next Page
Loading...
