Customizing the Picture Settings
You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color", "Tint", and "Color Tone"
according to personal prethrence. You can select "Standard" which automatically recalls your personalized picture settings.
Press the MENU button. Press the 4 or II, button to select "Picture",
_: then press the ENTER _ button.
Pressthe-.or.-buttontose,ect"Mode",thenpresstheENTER÷
........................................button. Press the A or v- button again to select "Mode", then press the
ENTER _ button.
Press the A or v button to select the desired picture mode (Dynamic,
Standard, Movie, Custom), then press the ENTER _ button.
Press the A or v button to select a particular option (Contrast,
Brightness, Sharpness, Color, or Tint), then press the ENTER _ button.
Press the 4 or _- button to decrease or increase the value of a
particular item.
While adjusting a picture option, you can also select another option
(Contrast, Brightness, Sharpness, Color, or Tint) by pressing the
A or v button.
>- "Tint" doesn't operate in HDMI or 480p Component or higher modes.
::_ The Tint cannot be adjusted while watching Digital TV.
In PC mode, only the Contrast and Brightness can be selected.
continued...
English-41
To Next Page
Loading...
