English - 14
Adjusting the Volume
Using the Volume Buttons
1. Press the
VOL
or V
OL
button to decrease or increase the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUT
E button.
1. Press MUT
E button and the sound cuts off.
The " " is displayed on the screen.
2. To turn mute off, press the MUT
E button again or simply press the
VOL
or V
OL
button.
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE-CH button to quickly alternate between them.
Using the PRE-CH Button to select the Previous Channel
Viewing the Display
1. Press the INFO button on the remote control.
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
The display identies the current channel and the status of certain audio-video settings.
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’s left side has icons:
Picture, Sound, Channel, Setup, Input, Guide, PIP.
2. Use the ▲ or ▼ button to select one of the icons.
Then press the ENTER
button to access the icon’s sub-menu.
3. Press the EXI
T button to exit.
The on-screen menus disappear from the screen after about one minute.
Mode
:
Dynamic
Contrast : 100
Brightness : 45
Sharpness : 75
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1
Backlight : 10
Picture
DTV Air
05.1
Thu 6 Jan 10:01 am
Now_Event(1/2), Ver(2/6) : It sho...
Now_Event(1/2), Ver(2/6) : Extended Event Text...It should be less then 192 bytes
and 80 standard size characters, The total number of APR codes used in the
♥
TV GloboHD
10:00 am - 11:00 am
12 1080i Multi
To Next Page
Loading...
