English - 28
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
2. Press the ▲ or ▼ button to select "Size", then press the E
NTER
button.
3. Press the ▲ or ▼ button to select the screen format you want.
Press
the ENTER
button.
Press the EXIT button to exit.
• 16:9: Sets the picture to 16:9 wide mode.
• Zoom1: Magnifies the size of the picture on the screen.
• Zoom2: Magnifies the size of the picture more than “Zoom1”.
• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3: Sets the picture to 4:3 normal mode.
• Just Scan: Use the function to see the full image without any cutoff when
HDMI (1080i/1080p), DTV (1080i) signals are input.
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
Temporary image retention may occur when viewing a static image on the set for
more than two hours.
HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
16:9
Sets the picture to 16:9 wide mode.
Zoom1
The screen size when Wide screen
is vertically enlarged.
Zoom2
The screen size when the Zoom1
screen is vertically enlarged.
Wide Fit
Enlarges the aspect ratio of the
picture to t the entire screen.
4:3
Sets the picture to 4:3
normal mode.
Just Scan
Use the function to see the full
image without any cutoff when
HDMI(1080i/1080p), DTV (1080i)
signals are input.
•
In analog TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected.
(16:9, Zoom1
, Zoom2, 4:3).
•
You can select the "16:9", "4:3" and " Wide Fit" in the DTV(1080i), Component (720p, 1080i, 1080p) or HDMI (720p, 1080i,
1080P) mode.
• In PC mode, only 16:9 & 4:3 modes can be selected.
•
You must select Zoom with P.SIZE button on the remote if you want to move the Zoom 1 or 2 picture up or down.
•
When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).
•
Double Window ( ), and Double Wide ( ) modes have been set in PIP, the Picture Size cannot be set.
Changing the Screen Size
Picture
Backlight : 10
Detailed Settings
Size : 16:9 ►
Digital NR : Auto
Active Color : On
DNIe : On
Picture Reset
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
ReturnEnter
Move
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options,
each designed to work best with specic types of video input. Your cable box or satellite receiver may have its own set of
screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
To Next Page
Loading...
