English - 39
Resetting the Sound Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER
button.
2. Press the ▲ or ▼ button to select "Sound Reset", then press the EN
TER
button.
3. Press the ◄ or ► button to select “Reset All”, “Reset Sound Mode” or "Cancel"
then press the E
NTER button.
Press the EXIT
button to exit.
• Reset All: All the sound values return to default settings.
• Reset Sound Mode: Current sound values return to default settings.
You can restore the Sound settings to the factory defaults.
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the
room.
Connecting Headphones (Sold separately)
When you insert the head set jack into the corresponding port, you can operate only
"SRS TruSurround XT", "Multi-Track Sound", "Auto Volume" and "Sound Reset" in
Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones
to the system.
The headphone volume and TV volume are adjusted separately.
TV Side Panel
Sound
Sound Select : Main
Digital Output : PCM
Sound Reset ►
Enter Return
Sound Reset
Select the sound reset options.
Cancel
Reset Sound Mode
Reset All
Move
15
To Next Page
Loading...
