Samsung LN40F81BD - Adjusting the Color Tone; Adjusting the Backlight; Resetting the Picture Settings to the Factory Defaults

English - 24
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the M
ENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select "Color Tone", then press the EN
TER button.
3. Press
the ▲ or ▼ button to select "Cool2", "Cool1", "Normal", "Warm1"
or "Warm2".
Press the ENTER button.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and
"Warm2" cannot be selected. "Movie" mode is only available.
Each adjusted setting will be stored separately according to its input mode.
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1 ►
Backlight : 10
Detailed Settings
Size
: 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Picture Reset
Picture
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1 ►
Backlight : 10
Detailed Settings
Size
: 16:9
Digital NR : Auto
Active Color : Off
DNIe : On
Picture Reset
Cool2
Cool1
Normal
Warm1
Warm2
Picture
Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2.
Press the ▲ or ▼ button to select "Picture Reset", then press the ENTER button.
Press the ◄ or ► button to select “Reset All”, “Reset Picture Mode” or "Cancel"
then press the ENTER button.
Press the EXIT
button to exit.
Each mode can be reset.
 Reset All: All the picture values return to default settings.
 Reset Picture Mode: Current picture values return to default settings.
Picture Reset
Select the option for picture reset.
Cancel Reset Picture Mode Reset All
EnterMove
Return
Active Color : On
DNIe : On
Picture Reset ►
Picture
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the M
ENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select “Backlight”, then press the E
NTER button.
3. Press the ◄ or ► button to decrease or increase the value of the backlight
brightness.
Press the ENTER button.
Press the EXIT button to exit.
Tint (G/R) : G50/R50
Color Tone : Cool1
Backlight : 10 ►
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Picture Reset
Picture
10
Backlight
Enter ReturnAdjust
Adjusting the Backlight
BN68-01378A-Eng-1112.indd 24 2007-11-13 �� 4:03:50