English - 78
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
M
enu
Description
V
iew TV Switches from Anynet
+
to TV broadcast mode.
Device L
ist Displays the Anynet+ device list.
Menu on Device Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Device Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Recording Starts a recording immediately. (This menu works only for a device supporting recording.)
Timer R
ecording Allows reserving a recording.
(This menu works only for a device supporting recording reservations.)
Stop R
ecording Stops recording.
Receiver Sound is output through the receiver (home theater). A audio stream in HDMI is one way only
from Device to TV. But there’s SPDIF output in TV. So TV sound can be sent to HT.
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►/E
NTER buttons
Color buttons
EXIT button
After switching to the device, while playing a file
◄◄ (Backward search)
►► (Forward search)
(Stop)
►
(Play/Pause)
Device with built-in Tuner
After switching to the device, when you are watching a TV
program
C
H
▲/▼ button
A
udio Device When Receiver is activated
V
OL
+/- button
MUT
E button
Anyview2 When watching TV ►
(Play/Pause)
The Anynet
+
function only works when the active source on the TV remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet
+
devices using the buttons on the side of the TV. You can control Anynet
+
devices only using the
TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet
+
device.
The Anynet
+
functions do not operate with other manufacturers’ products.
The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
1. Press the A
nynet+ button.
2. Press the ▲ or ▼ button to select to Recording
Immediately and press the E
NTER
button. Recording begins.
When there are more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select to a recording device and press the ENTER button.
Recording begins.
When the recording device is not displayed
Select "Device List" and press the red button to search devices.
Press the EXI
T button to exit.
You can record the source streams by selecting "Record" after pressing the Anynet
+
button.
Pressing the REC button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording devices users manual.
Device List
Recording
Timer Recording
Receiver Off
Picture Size : 16:9
Picture Mode : Dynamic
Sound Mode : Custom
Sleep Timer : Off
Move
Enter
TOOLS
To Next Page
Loading...
