English - 22
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source
of your choice.
1. Press the M
ENU button to display the menu.
Press the▲ or ▼ button to select “Input”, then press the ENTER button.
2. Press the E
NTER
button to select "Source List".
Press the ▲ or ▼ button to select signal source, then press the ENTER
button.
You can choose between the following sets of jacks: AV1, Component1,
Component2, PC, HDMI1/DVI, or HDMI2 on the TV’s rear panel and AV2,
S-Video or HDMI3 on the TV’s side panel.
HDMI1/DVI, HDMI2, HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
Using the Color buttons on the remote with the Source list
• Red (Refresh): Refreshes the connecting external devices.
• Blue (Option): Displays the Edit Name and Information menus.
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the ENTER button.
Press the ▲ or ▼ button to select "Edit Name", then press the ENTER
button.
2. Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video", "Component1",
"Component2", "PC", "HDMI1/DVI", "HDMI2" or "HDMI3" input jack, then press
the E
NTER
button.
3. Press the ▲ or ▼ button to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "Game",
"Camcorder", "DVD Combo", "DVD HDD Recorder", "PC", "Internet TV Recv.",
"Interactive TV Recv.", "VOD STB", "TV" input source, then press the E
NTER
button.
Press the EXIT button to exit.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 1 port, you should set the "HDMI1/DVI" mode to "PC" in the "Edit
Name" of the "Input" mode. If the "HDMI1/DVI" mode is not PC, it works
depending on the TV setting.
Source List
Edit Name
Input
TV
AV1 ----
AV2 ----
S-Video ----
Component1 ----
Component2 ----
PC ----
Refresh Option
Source List
Edit Name
Input
Edit Name
AV1 : ---- ►
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1/DVI : ----
▼
Enter ReturnMove
Edit Name
AV1 : ----
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1/DVI : ----
----
VCR
DVD
D-VHS
Cable STB
HD STB
Enter ReturnMove
To Next Page
Loading...
