English - 52
Function Description
The Analog Caption function operates in either analog TV channel mode or external signal mode.
1. Press the M
ENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Caption”, then press the E
NTER button.
3. Press the E
NTER button to select “Caption”.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
4. Press the ▲ or ▼ button to select “Caption Mode”, then press the E
NTER button.
Press the ▲ or ▼ button to select submenu (CC1~CC4, or Text1~Text4)
you want, the press the ENTER button.
Press the EXIT
button to exit.
• CC1: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync with the sound, preferably
matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried
in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language
captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are
not sufficient.
The Caption feature doesn’t work in Component, HDMI or PC modes.
The availability of captions depends on the program being broadcast.
Press the CAPTION button on the remote control to select "On" or "Off".
Viewing Closed Captions (On-Screen Text Messages) - Analog
Setup
Timer 2 : Inactivated
Timer 3 : Inactivated
Caption ►
Game Mode : Off
Menu Transparency : Medium
PC
Home
theater PC : Off
HDMI Black Level : Normal
Movie Plus : Off
Light Effect : In Watching TV
Caption
Caption : Off
Caption
Mode : Default
ReturnEnter
Off
On
Move
Caption
Caption : Off
Caption
Mode : Default
ReturnEnter
CC1
CC2
CC3
Move