English - 16
Storing Channels in Memory (Automatic Method)
1. Press the M
ENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ button to select "Auto Program", then press the EN
TER
button.
3. Press the ▲ or ▼ button to select an antenna connection, then press the E
NTER
button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Air+Cable: “Air” and “Cable” antenna signals.
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected
to ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
"Air+Cable".
The TV begins memorizing all available stations. When pressing the ENTER
button during a storing process, the message "Would you like to stop the auto
channel selection?" is displayed. Select "Yes" by pressing the ◄ or ► button.
4.
After all the available channels are stored, the “Auto Program” menu reappears.
Press the EXI
T button to exit.
ReturnEnter
Auto Program
Select the antennas to memorize
Air
Cable
Air+Cable
Move
Auto Program
Auto Program is incomplete.
3 channels are memorized.
Air : 1 Cable : 2
ReturnEnter
OK
Auto Program
Would you like to stop the auto channel
selection ?
Air 10
3%
Digital Channels are added on the favorite
channel list.
ReturnEnter
No
Yes
Move
Auto Program
Auto Program in Progress.
Stop
Enter
Air 10
3%
Digital Channels are added on the favorite
channel list.
Return
Channel
Antenna
:
Air
Channel List
Auto Program ►
Fine Tune
Signal Strength
LNA :
On
Color System : Auto
Start
Start
Start
To Next Page
Loading...
