Samsung Q45 - Bluetooth

165
Q I cannot nd or connect the headset.
A1
If the headset is connected to another device and is
currentlybeingused,youwillnotbeabletolocate
it.Inthiscase,evenifyoulocatetheheadset,you
willnotbeabletoconnectit.Disconnecttheheadset
fromthedeviceandthentryagain.
A2
If the headset is connected to the power adapter,
theBluetoothwirelessconnectionisnotavailable.
Disconnecttheheadsetfromthepoweradapterand
tryagain.
A3 ABluetoothheadsetgenerallyprovidesOn/Offand
Pairingmodes.Toconnecttheheadsettoanother
Bluetoothdevicesuchasacomputerorcellphone,
itmustbeinPairingmode.Switchtheheadsetto
Pairingmodeandtryagain.
Ingeneral,aBluetoothheadsetinPairingmodeis
automaticallyswitchedtoOn/Offmodeafterapre-
determined period of time.
Q
I have connected the headset, but I cannot hear
sound normally.
A1 IftheBluetoothheadsetisproperlyconnectedto
a computer, the Control Pane Sound Playback
Device changes to Bluetooth Audio(foramono
headset)orHigh Quality Bluetooth Audio (fora
stereoheadset).IftheSound Playback Device in
the Control Panelisnotchangedproperly,youmay
nothearanysound.Checktheaudiosettingsinthe
ControlPanelaccordingtotheproceduresbelow.
Conguring Sounds and Audio Devices in the
Control Panel

 Double-Click
Start > Control Panel > Sounds
and Audio Devices.

 Selectthe
AudiotabintheSoundsandAudio
DevicesPropertieswindow.

 CheckiftheSoundplaybackandSound
recordingdeviceissettoBluetoothaudio(fora
monoheadset)orHighQualityBluetoothaudio
(forastereoheadset).
Bluetooth