Samsung Q45 - Page 77

76
5
 ClickGeneraltabandselectaLANdriverfrom
Connect using:.SelectInternet Protocol(TCP/IP)
andclickProperties.
ThedisplayedLANdrivermayvarydependingonthe
LANdevicetype.
Click
Install to add a network component as shown in
thegurebelow:Youcanaddaclient,aservice,ora
protocol.
6
 CongureIPsettings.
SelectObtain an IP address automatically when
usingDHCP.IfyouuseastaticIP,selectUse the
following IP addressandenterthevalues.
IftheIPofyourcomputerisnotautomaticallyassigned,
contact the network administrator.
7
 Ifallsettingsaremade,clickOK.Nowthenetwork
congurationisnished.