Samsung SHR-2160 - 2 Event Search

English
SHR-2160/2162/2080/2082 USER’S MANUAL
8-3
● Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, and
V.Loss(Video Loss) Recording by the time.
● You shall select a channel to search to see the event information of the channel.
● On the basis of event information for each channel, the system searches a video file for the
event. Only one channel is allowed for video search.
● If you use both the [Enter] button and the ¦, button key to select a channel, the system
will show the list of event for the selected channel only.
● After channel selection, you can use the ¦, [Enter] button to select an event out of the
list. The checkbox on the left of the selected event number will be checked.
● If you want to start the search, use the button until you reach [Start] and press the [Enter]
button. If you want to cancel the search, move to the [Cancel] and press the [Enter]
button. If you wish to view the event list of the next screen, select [Next] and press the
[Enter] button and if you wish to view the event list of the previous screen, select [PREV]
and press the [Enter] button.
● When you want to see the initial screen's event list, select the [First] button, and when you
want to see the last screen's event list, select the [Last] button.
● In the case of the 2080/2082, 8-channel information comes up.
● If you press the search button while viewing the event recording list, the event search list
comes up again.
This makes searching for the next event easier and faster.
2
Event Search
SHR-2160/2162/2080/2082-E-2 10/19/07 9:42 AM Page 8-3