Samsung SHR-2160 - Factory Default

10-6
English
3
Factory Default
This restores the Network information and preset values in
SHR-2160/2162/2080/2082 to the original state at the time of factory shipment.
Factory Default will be done as follows;
- Use System / Load Factory Default in MENU or,
- In Live mode, press and hold down MODE and then PTZ on the front panel for
6 seconds to reset the settings.
Classification Detailed Items Factory Setup
Date Format YYYY-MM-DD
Time Format 24 Hours
Language English
DST Off
Password 4321
Password Lock On
Record Lock Off
HDD repeat record Overwrite
HDD ending alarm Off
Video On
Audio Off
CAM_01 ~ CAM_16
Title
(SHR-2160/2162)
CAM_01 ~ CAM_8
(SHR-2080/2082)
Auto Seq. 5 sec
ID Camera No.
Protocol None
Baudrate 9600
Parity None
Data 8
Stop 1
Serial Mode Half Duplex
Brightness 50
Contrast 50
Color 50
System Setup
Camera Setup
PTZ Device
Camera Config
HDD Mode
Time/Date/Language
Password
Screen Setup
SHR-2160/2162/2080/2082-E-3 10/18/07 4:49 PM Page 10-6