Samsung SHR-2160 - Motion Detection Setup

English
SHR-2160/2162/2080/2082 USER’S MANUAL
5-25
Motion Detection Setup
● Motion Detection Mode
Off : Motion Detection does not operate
On : Motion Detection operates.
● Area
Selects the Motion Detection area.
It is impossible to set 4 block rows(Up / Down / Left / Right) to allow them to be displayed in
all monitors.
 Select All : Selects the whole area.
 Select Block : Selects a block every time. Selection is done by a toggle system.
 Select Quarter : Splits the whole area into 4 pieces, which enables selecting a fourth of
the whole area.
 Clear All : Cancels the whole area.
 Save & Exit : Saves and exits.
 Exit : Exits without saving.
SHR-2160/2162/2080/2082-E-1 10/19/07 9:36 AM Page 5-25