Samsung SHR-2160 - Viewer Setup

English
9-26
Note
Note
- SHR-2160/2162/2080/2082 uses 4 ports for TCP connection.
- The PORT number is flexible and 4 consecutive numbers are grouped for the
change ( 554,555,556,557
➝ 558,559,560,561 )
- If you use the IP Router for network composition, you should allocate a protocol
for SHR-2160/2162/2080/2082.
Viewer Setup
- Click the [Viewer Setup] for Viewer Setup.
- Viewer Setup sets the various kinds of item related to the operation of Smart
Viewer.
- Viewer Setup is composed of 5 items; Video Recording, File Converting,
Sequence Time, OSD Display, and Auto Connection.
! Item to set the information necessary for saving the video data displayed into
*
.dvr file when connecting with SHR-2160/2162/2080/2082.
@ Item to set the information necessary for converting the file saved
in your PC with
*
.dvr file into JPEG file or AVI file.
# Item to set the information necessary for the auto sequence mode.
$ Item to set the information of Smart Viewer OSD.
% Item to set whether Smart Viewer shall be automatically connected to
DVR(SHR-2160/2162/2080/2082) or Site when it begins running.
^ This is a menu item that is designed to set the alarming time when it receives
an event message such as an alarm, motion and/or Video loss.
& Item to set a port for the callback connection.
* This item is for the language setup.
1
2
3
5
4
6
8
7
SHR-2160/2162/2080/2082-E-3 10/18/07 4:49 PM Page 9-26