Samsung SHR-2160 - Page 144

English
SHR-2160/2162/2080/2082 USER’S MANUAL
9-25
● Callback
- You can set the Callback function of SHR-2160/2162/2080/2082.
- In the event of Alarm, Motion Detection, or Video Loss, set the IP address and
port of PC where SmartViewer is installed to forward Callback messages. In
failure of message forwarding, set the value for retrial.
● Transfer Protocol
- You can change the transfer protocol setting value. The protocol supports
TCP/IP and UDP(Unicast, Multicast). Control Port(TCP/IP) and Port(UDP) to alter
the connection port. Both Multicast IP and TTL are used for UDP(Multicast).
SHR-2160/2162/2080/2082-E-3 10/18/07 4:49 PM Page 9-25