Samsung SHR-2160 - Page 83

English
5-26
● Sensitivity
Sets the sensitivity of motion detection. Sensitivity grade consists of Low ➝ Medium ➝ Very
High in the ascending order.
● Alarm-Out
Sets the Alarm-Out when Motion occurs.
5 Alarm Outs are supported.
Select an alarm-out that you want to synchronize with the current motion channel.
Multi-selection is possible.
● Duration
Sets the Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous
Video Loss Detection Setup
● Video Loss State
Off : Video Loss does not operate.
On : Video Loss operates.
● Alarm-Out
Selects the Alarm-Out when the current Video Loss occurs.
3 Alarm Outs are supported in the present. Select an alarm-out that you want to
synchronize with the current motion channel. Multi-selection is possible.
● Duration
Sets Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous
● In the case of the 2080/2082, 8-channel information comes up.
SHR-2160/2162/2080/2082-E-1 10/19/07 9:36 AM Page 5-26