Samsung SHR-2160 - Page 81

English
5-24
Alarm Detection Setup
● Off : Sensor does not operate.
① N.O(Normal Open) Sensor : Sensor remains open all the time and if closed,
an alarm will be issued. (A Contact)
➁ N.C(Normal Close) Sensor : Sensor remains closed all the time and if open,
an alarm will be issued. (B Contact)
● Cam
It is used to set a camera that synchronizes with the current sensor.
The default setting follows the sensor number. A sensor can synchronize with multiple
cameras so multiple values can be selected. You can set a preset for each camera to
synchronize sensors with cameras. If a sensor triggers the corresponding camera, the
camera can show you the preset location.
● Alarm-out
Sets the Alarm-Out when Alarm Sensor sounds.
5 Alarm Outs are supported un the present.
Choose an alarm-out that you want to synchronize with the current sensor.
Multi-selection is possible.
● Duration
Sets the Alarm-Out Duration. Alarm-Out continues for the set value.
Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous
● In the case of the 2080/2082, 8-channel information comes up.
SHR-2160/2162/2080/2082-E-1 10/19/07 9:36 AM Page 5-24