Samsung SHR-2160 - Page 16

English
SHR-2160/2162/2080/2082 USER’S MANUAL
1-9
Channel How to operate the keys
Press the 1 button.
Press the 2 button.
Press the 3 button.
Press the 4 button.
Press the 5 button.
Press the 6 button.
Press the 7 button.
Press the 8 button.
Press the 9 button.
Press the 0(10+) button, release, and press the 0 button again within 3 seconds.
Or press the 0(10+) button, release, and wait 3 seconds.
First, press the 0(10+) button, release, and then press the 1 button again within 3 seconds.
First, press the 0(10+) button, release, and then press the 2 button again within 3 seconds.
First, press the 0(10+) button, release, and then press the 3 button again within 3 seconds.
First, press the 0(10+) button, release, and then press the 4 button again within 3 seconds.
First, press the 0(10+) button, release, and then press the 5 button again within 3 seconds.
First, press the 0(10+) button, release, and then press the 6 button again within 3 seconds.
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
- Remote Control Setup : From the setup menu: System ➝ Remote Control Device ➝ Remote Control : On/Off
- System ID Setup : From the setup menu : System
➝ Remote Control Device ➝ System ID
Footnote 1. How to operate the number keys (channel select)
Footnote 2. Changing the Remote Control ID
As you press the SYS ID key, input the desired 2-number ID in order (Remote default ID : 00)
For example, if you want to change the remote control ID to 08: As you press the SYS ID key,
input 0
➝ 8 in order.
After entering, press the SYS ID key again in order to verify that the ID on the screen is 08 then
change is completed.
SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 1-9