2. Open an internet browser on your computer, enter [http://192.168.1.100] in the address
bar, and then press Enter. You will be connected to the login screen of Web Viewer of the
SNC-1300 network camera.
3. Log in with the administrator account, and then move to the "Network" page. (The default
administrator login information is ID: admin, and PW: 11111111.)
· The default administrator login information is ID: admin, and PW: 11111111.
Note
4. Move to Config
→
Network page to enter optimal network settings for install base. Click
Apply button when done to save the settings.
①
LAN / xDSL / DHCP Setup
Category Description
LAN
Enter the network information of the camera to connect it to a local network
or assign it to a static IP.
xDSL When using xDSL, enter the xDSL ID and password.
DHCP
Activate the DHCP option if the camera receives an IP from the DHCP server
automatically. This option is available for LAN and DHCP server
environments. Generally, medium to large networks run a DHCP server on a
LAN while small networks use the DHCP function of IP routers.
Chapter 3. Installing Camera & Network Setup
http://192.168.1.100
http://192.168.1.100
• 192.168.1.100 is the IP address for the camera and will be unavailable as an internal IP address for
your computer.
Caution
80
(default : 80)
To Next Page
Loading...
