Category Description
E-mail
Recipient E-mail
Address 1
Recipient E-mail
Address 2
Enter a maximum of 2 email addresses to transfer data when the
alarm activates.
SMTP Server Name
If you use an external email server, enter the name of the email
SMTP server.
Use
Authentication
Check to use an external email server; it requires an ID and
password.
ID Enter an ID to connect to your email server.
Password Enter the password for the ID that is entered above.
Mail Subject Enter the subject for an email.
Mail Body Enter content for the email.
· Upon the occurrence of an event, a JPEG image is sent via email and/or
uploaded to the FTP server.
Note
• New settings are saved only if you click the button at the bottom of the screen. The
button cancels new settings.
• These settings do not apply to the Continuous Jpeg Image Transmission to FTP Server option at the
Video Setup → Streaming menu.
Caution
The following page appears when selecting at the top of the screen. Buttons
on the left side of the screen move to a relevant menu page.
4.2.4. System
Chapter 4. Using Web Viewer
4.2.4.1. Product Info
■Product Info
Category Description
Model Displays the model name of the camera.
Mac Address Displays the MAC address of the camera.
Device Name
Name the camera to distinguish it when using multiple cameras. (English
Only)
Channel Name
Name the channel 1. When playing multiple video feeds on the screen using
a multi-channel device such as a video recorder, naming a channel helps you
to distinguish it from others. (English Only)
Location Enter the installed location for the camera.
Description Add a description for the camera.
Memo Memo
• New settings are saved only if you click the button at the bottom of the screen. The
button cancels new settings.
Caution
Memo
To Next Page
Loading...
