• New settings are saved only if you click the button at the bottom of the screen. The
button cancels new settings.
Caution
4.2.3.2. IP Filtering
You can allow or deny certain IPs.
Category Category
IP filtering Check on use to enable IP Filtering.
Default policy
Determines action on an IP displayed in the Filtering Rules pane.
Allow : Allows connections for the IP. Deny: Rejects connections for the IP.
Filtering Rules
Use: Activates the Default policy for an IP next to the checkbox;
check to apply the policy to the IP.
IP Range : Indicates a range of IPs to apply IP Filtering.
e.g.) 192.168.30.4 ~ 100
Apply IP Filtering to IPs from 192.168.30.4 to 192.168.30.100.
Chapter 4. Using Web Viewer
◇Digital In(Sensor) Setup
Category Description
Sensor Use Check to use a sensor.
Sensor Type
“Normal Open” and “Normal Close” are available choices when selecting the
type for a connected sensor.
4.2.3.3. Alarm Sensor
Configure the options to use the Alarm services by attaching a sensor to the camera.
To Next Page
Loading...
