4.2.4.2. User
You can change the password of the administrator ID and configure user accounts on this page.
Category Description
Administrator Password
Change
Change the password for the administrator account.
Guest Setup
Check on or off to allow guest access to main viewer; enable or disable the
Guest Access button.
Current User
You can add and delete users, and configure permissions for each user. The
default password is ‘user1’ to ‘user5’.
Category Description
Video Allows using video-related options: compression and resolution.
Control
Allows outputting audio, alarms and controlling the camera PTZ operation.
Audio Allows inputting audio.
Use
Check to activate an account.
(Unchecked user accounts cannot be used to login.)
■User Permissions
Available user permissions in the Current user menu are as follows.
Chapter 4. Using Web Viewer
· e.g.1) To restrict a user from controlling the camera: uncheck Control.
※
The Pan, Tilt, Zoom, and Audio, Alarm icons are grayed out and disabled.
· e.g.2) Restrict a user from using video-related options: uncheck Video.
※
The Compression and Resolution settings area are grayed out and disabled.
• New settings are saved only if you click the button at the bottom of the screen. The
button cancels new settings.
Caution
To Next Page
Loading...
