• New settings are saved only if you click the button at the bottom of the screen. The
button cancels new settings.
Caution
The following page appears when selecting PTZ Setup at the top of the screen.
The following page appears when selecting PTZ Setup at the top of the screen.
You can change settings depending on the installed PTZ receivers.
■Device Setup
Category Description
Device
Setup
Device ID Assign a device ID to the receiver set on the Mode menu.
Mode Select a camera receiver : SRX-100B or SUNGJIN.
4.2.2 PTZ SETUP
4.2.1.7 Replay / Backup
If Overwrite is not checked on and the SD memory card is full, the camera stops recording data.
Category Description
Storage
Informa
-tion
Storage Size
Total : Indicates the total capacity of an SD memory card.
Free : Indicates free space of an SD memory card.
Total Clips
Indicates the number of files(Sensor(Sensor Detection), MD(Motion
Detection)) saved in the SD memory card.
Replay/
backup
Event Type
MD(Motion Detection) and Sensor(Sensor Detection) are available; displays
only the selected type of event files when searched.
Search
MD and SD are available; displays only the selected type of event files
when searched.
,
Moves to a page that contains a list of older files.
> : Moves to the previous page.
>> : Move to the last page.
,
Moves to a page that contains a list of newer files.
< : Moves to the next page.
<< : Move to the last page.
Goto Enter a page number to go directly to it.
Plays a saved video.
Stops the video.
Pauses the video.
Save the video image as a JPEG file.
Saves the video to your computer.
Install Slim Player.
Chapter 4. Using Web Viewer
·
For more details about the PTZ button, refer to Page 41.
Note
To Next Page
Loading...
