4.2.4.3. Time
■Time Setup
Category Description
Date Configures the current date of the camera.
Time Configures the current time of the camera.
Displays the current time.
Select the GMT and city of the camera.
Check use Daylight Saving Time to apply DST according to your city and country.
Enter the address of your NTP (Network Time Protocol) server. NTP (Network Time Protocol)
synchronizes the time among the various devices and systems connected to a network; the NTP
client automatically communicates with registered NTP servers to adjust its time setting. If you
want to use an NTP server other than the default, change the address of Server1 to Server5.
■Current Time
■Time Zone
■
Time Server
Chapter 4. Using Web Viewer
4.2.4.4. Log Message
Category Description
Syslog (System Log)
Displays system logs in 5 different categories : Device, Network, User,
Configuration, and Etc. Select a category and then press Search to display logs.
Selecting All displays all available information regarding System Log.
Evtlog (Event Log)
Displays event logs in 5 different categories : Motion Detection, Sensor Input,
Relay Output, and Etc. Select a category and then press Search to display
logs. Selecting All displays all available information regarding System Log.
Time Displays the time when the event is logged.
Description Displays the description of a log.
Info Displays the details of a log on a window at the bottom.
Moves to the first page.
Moves to the previous page.
Moves to the next page.
Moves to the last page.
Goto
Enter a page number, and then press the Goto button to move to the page
directly.
Logs the latest actions of a camera in a file.
• To change time by using the Set Manually option, you must fill out all fields.
Caution
To Next Page
Loading...
