PTZ
Relay
Basic
Select the PAN/TILT button to control the Pan and
Tilt operations of a camera. Clicking the button displays a circular
button as shown below. Click an arrow on the circular button to
rotate the camera in that direction.
adjusts the zoom and focus of the camera. Clicking
the button displays a circular button as shown below.
Click a symbol on the circular button to zoom the camera
in or out, or adjust the focus.
Controls the PTZ operation of the camera.
Turns on or off a connected relay; this button activates when a relay is turned
on or off.
Select a screen resolution and image compression type.
· This PTZ option becomes available only if the external device (SRX-100B, SUNGJIN
(e.g. SJ3000RX)) is installed and supports the PTZ operation.
Note
• In case a relay is not connected to the camera, clicking this button does not turn a relay on or off even
if the button turns blue when pressed.
Caution
Chapter 4. Using Web Viewer
•
Resolution (For more information about the
Main and Sub Stream settings, please refer
to the Video Setup page.)
- Main
- Sub
•
Compression Types
- MPEG-4
- M-JPEG
•
Frame Rate
- A maximum number of frames to transfer
per second.
•
Quality
- Video Quality
(Very High, High, Middle, Low, Very Low)
To Next Page
Loading...
