· Select the [Config
→
Network] menu on the network camera webpage.
· Click use under the DDNS options to enable the service, and then enter the address of
the DDNS server.
· Enter the ID (Domain Name) and password used to register the camera on the iPOLiS
website into ID and PW.
Now the SNC-1300 is set up with the DDNS service.
❍
Step 3) Configure the camera with the DDNS information.
Pic 4-7. Device List (The camera will be listed up if it is successfully registered.)
Pic 4-6. Register Camera (Check the availability for your desired domain name.)
Chapter 4. Using Web Viewer
SNC-1300
80
(default : 80)
To Next Page
Loading...
