CompactFlash Memory Card Product Manual
SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION20
3.0 Installation
3.1 Mounting
The CompactFlash Memory Card may be
installed in any platform with a 3M 50 position
Surface Mount Interface Header (3M P/N N7E50-
7516VY-20) and Ejector (3M P/N D7E50-7316-02),
or equivalent, properly installed. Refer to the
appendix at the end of this manual for additional
technical information.
In addition, the CompactFlash Memory Card may
be used in any standard PCMCIA Type II (5 mm) or
Type III (10.5 mm) socket as supplied by an OEM
using the optional SanDisk PCMCIA Adapter
SDCF-03.
To Next Page
Loading...
Need help?
General