SanDisk CompactFlash - Standby - 96 H, E2 H; Standby Immediate - 94 H, E0 H

CompactFlash Memory Card Product Manual
SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION 73
6.1.20 Standby - 96H, E2H
Bit -> 7 6 5 4 3 2 1 0
Command (7) E2H or 96H
C/D/H (6) X Drive X
Cyl High (5) X
Cyl Low (4) X
Sec Num (3) X
Sec Cnt (2) X
Feature (1) X
This command causes the CompactFlash Memory
Card to set BSY, enter the Sleep mode (which
corresponds to the ATA “Standby” Mode), clear
BSY and return the interrupt immediately.
Recovery from sleep mode is accomplished by
simply issuing another command (a reset is not
required).
6.1.21 Standby Immediate - 94H, E0H
Bit -> 7 6 5 4 3 2 1 0
Command (7) E0H or 94H
C/D/H (6) X Drive X
Cyl High (5) X
Cyl Low (4) X
Sec Num (3) X
Sec Cnt (2) X
Feature (1) X
This command causes the CompactFlash Memory
Card to set BSY, enter the Sleep mode (which
corresponds to the ATA “Standby” Mode), clear
BSY and return the interrupt immediately.
Recovery from sleep mode is accomplished by
simply issuing another command (a reset is not
required).