EasyManua.ls Logo

SanDisk CompactFlash - True IDE Mode I;O Output (Write) Timing Specification

SanDisk CompactFlash
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CompactFlash Memory Card Product Manual
SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION 37
4.3.13 True IDE Mode I/O Output (Write) Timing
Specification
Table 4-10 True IDE Mode I/O Write Timing
Item Symbol IEEE Symbol Min ns. Max ns.
Data Setup before IOWR tsu(IOWR) tDVIWH 60
Data Hold following IOWR th(IOWR) tlWHDX 30
IOWR Width Time tw(IOWR) tlWLIWH 165
Address Setup before IOWR tsuA(IOWR) tAVIWL 70
Address Hold following IOWR thA(IOWR) tlWHAX 20
CE Setup before IOWR tsuCE(IOWR) tELIWL 5
CE Hold following IOWR thCE(IOWR) tlWHEH 20
IOIS16 Delay Falling from Address tdfIOIS16(ADR) tAVISL 35
IOIS16 Delay Rising from Address tdrIOIS16(ADR) tAVISH 35
Figure 4-8 True IDE Mode I/O Write Timing Diagram
Notes: The maximum load on -IOIS16 is 1 LSTTL with 50pF total load. All times are in nanoseconds.
Minimum time from -WAIT high to -IOWR high is 0 nsec, but minimum -IOWR width must still be met.
Din signifies data provided by the system to the CompactFlash Memory Card.

Table of Contents

Related product manuals