Sanyo DSR-2108 - Security Lock Functionality; Setting the Security Lock; Canceling the Security Lock

28
Setting the security lock
Setting a security lock locks all the operation buttons of this
unit.
b Setting a security lock
1
Press the EXIT/STOP button for approximately
5 seconds.
The password entering screen is displayed.
2
Enter the "ADMIN PASSWORD" using the channel
selection buttons.
The factory default password is "1111".
3
Press the ENTER button.
The security lock is set and the blue security lock icon is
displayed.
b Canceling the security lock
1
Press the EXIT/STOP button for approximately
5 seconds.
The password entering screen is displayed.
2
Enter the "ADMIN PASSWORD" using the channel
selection buttons.
3
Press the ENTER button.
The security lock is cancelled and the blue security lock
icon disappears.
PASSWORD
- - - -
CH1
2009/05/03 09:04:54
2%
:A
2009/05/03 09:04:54
2%
:A
L8HBT_WA(DSR-2116_2108)(GB).book 28 ページ ２００９年５月２７日 水曜日 午後４時５０分