Sanyo PDG-DSU30 - Disassemble Top Cover Module; Disassemble Zoom Ring Module

PDG-DSU30 Condential 2-3
2-4 Disassemble Top Cover
Module
1. Unscrew 2 screws (as red circle) from the
Bottom Cover.
2. Unscrew 2 screws (as green circle) from
the IO Cover .
3. Remove the Top Cover Module.
2-5 Disassemble Zoom Ring
Module
1. Unscrew 3 screws (as red circle) from
the Top Cover Module.
2. Remove the Zoom Ring Module.