Sanyo PDG-DSU30 - Troubleshooting; LED Lighting Message

PDG-DSU30
Condential
3-1
Message
Power LED
(Red) (Blue)
Standby (Input power cable) Flashing (0.5 sec)
Normal (Power on)
Powering up (Warming up)
Power off (Cooling-I: It can’t accept
any key at this status)
Power off (Cooling-II: It can accept
power key to turn on the projector)
Flashing (0.5 sec)
Error (Lamp failed) Flashing (1 sec)
Error (Fan lock) Flashing (0.5 sec)
Error (Over temp.)
3-1 LED Lighting Message
Steady light
Chapter 3
Troubleshooting