Sanyo PDG-DSU30 - Disassemble Top Shielding; Disassemble IO Cover

PDG-DSU30 Condential 2-4
2-6 Disassemble Top
Shielding
1. Unscrew 9 screws (as red circle).
2. Disassembled the Top Shielding.
Top Shielding
2-7 Disassemble IO Cover
1. Unscrew 4 hex screws (as red circle).
2. Unfasten 2 tenons (as yellow square).
3. Disassembled the IO cover.
Note: - Take care the tenons when you
disassemble the unit.
IO Cover