Sanyo PDG-DSU30 - Disassemble Interlock Switch

PDG-DSU30 Condential 2-13
Interlock Switch
2-19 Disassemble Interlock
Switch
1. Unscrew 1 screw (as red circle) to
disassemble the Interlock Switch.
Note: Make sure the Interlock Switch cable be
wedged llister as the picture shown.
Lamp Driver
Lamp Driver
Holder
2. Unscrew 4 screws (as yellow circle).
3. Unplug 3 connectors (as blue square).
4. Disassemble the Lamp Driver and Lamp
Driver Holder.