Sanyo PDG-DSU30 - Firmware Upgrade Procedure

PDG-DSU30 Condential
5-4
5-1-3 Firmware Upgrade Procedure
1. Set up
- Hold on "POWER" button and plug in the
power cord.
- The Power LED will light red and blue.
- Loosen "POWER" button.
- Connect projector with RS232 cable to PC.
Note: - The system fan and the lamp will not
operate.
2. Execute the "DLP Composer
TM
Lite 9.2" le.
3. Click "Edit" and "Perferences".
RS232 cable
Power cord