13
Indicators
D
J
8
E
G
L
8
WARNING TEMP. indicator
This indicator flashes red when internal projector
temperature is too high. (pp.79, 86-88)
D
POWER indicator
This indicator lights green when the projector
is ready to be turned on in standby mode. And
it flashes green in Power Management mode.
(pp.63, 86-88)
J
LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.86-88)
Part Names and Functions
E
WARNING FILTER indicator
– Lights orange when the clogging of the filter
is detected or the filter counter reaches a time
set in the timer setting, urging immediate filter
replacement. (pp.68, 73, 88)
– Blinks orange during a filter cleaning process.
G
SHUTTER indicator
Lights blue when the shutter is closed. (p. 86)
L
LAMP REPLACE indicator
Lights orange when any of the projection lamps
reaches its end of life. (pp.76, 87)
LAMP 1/2/3/4 REPLACE indicators
- When any of the LAMP 1/2/3/4 REPLACE indicators lights:
The corresponding lamp is approaching its end.
- When any of the LAMP 1/2/3/4 REPLACE indicators flashes:
The corresponding lamp needs to be replaced.
To Next Page
Loading...
