Need help?Do you have a question about the Sanyo PLC HF10000L and is the answer not in the manual?
General| Matrix size | 1.65 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Projection distance | - m |
| Vertical scan range | 48 - 100 Hz |
| Horizontal scan range | 15 - 120 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | - |
| Keystone correction, horizontal | 30 ° |
| Interface | USB |
| Power LED | Yes |
| RS-232 ports | 2 |
| Dimensions (WxDxH) | 530 x 757 x 268 mm |
| Focus | Auto |
| Focal length range | - mm |
| Noise level | 43 dB |
| Noise level (economic mode) | 39 dB |
| Dot clock scanning frequency | 230 MHz |
| Lamp power | 380 W |
| Lamps quantity | 2 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Composite video in | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Wi-Fi | No |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
| Product color | Gray |
| Power consumption (standby) | 18 W |
| Power consumption (typical) | 955 W |
| Cables included | AC, RS-232 |
Weight and Dimensions| Weight | 27600 g |
|---|
To Next Page
