Sanyo PLC HF10000L User Manual

13
Indicators
q
w
e
r
t
y
e
WARNING TEMP. indicator
This indicator flashes red when internal projector
temperature is too high. (pp.78, 85-87)
q
POWER indicator
This indicator lights green when the projector
is ready to be turned on in standby mode. And
it flashes green in Power Management mode.
(pp.62, 85-87)
w
LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.85-87)
Part Names and Functions
r
WARNING FILTER indicator
– Blinks slow when the filter is being scrolled.
(pp.71, 85)
– Blinks fast when the filter scroll is not working
properly. (pp.71, 87)
– Lights orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement. (pp.67, 71, 87)
t
SHUTTER indicator
Lights blue when the shutter is closed. (p. 85)
y
LAMP 2 REPLACE indicator
Lights orange when the projection lamp 2 reaches
its end of life (pp.75, 86)
u
u
LAMP 1 REPLACE indicator
Lights orange when the projection lamp 1 reaches
its end of life (pp.75, 86 )

Sanyo PLC HF10000L Specifications

General

Matrix size	1.65 \
Matrix type	3-panel (p-Si TFT active)
Projection distance	- m
Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	- \
Projector native resolution	-
Keystone correction, horizontal	30 °
Interface	USB
Power LED	Yes
RS-232 ports	2
Dimensions (WxDxH)	530 x 757 x 268 mm
Focus	Auto
Focal length range	- mm
Noise level	43 dB
Noise level (economic mode)	39 dB
Dot clock scanning frequency	230 MHz
Lamp power	380 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Wi-Fi	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	Gray
Power consumption (standby)	18 W
Power consumption (typical)	955 W
Cables included	AC, RS-232

Weight and Dimensions

Weight	27600 g