7
Safety Instructions
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the
functionality of the projector. Failure to so such will void any applicable warranties.
Cautious use of equipment with laser technology
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the
horizontal plane.
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not roll the projector more
than 10 degrees from side to
side.
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted
properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty
on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit
or installation of the ceiling mount kit in an improper location.
CAUTION ON CEILING MOUNTING
Do not put the projector
on either side to project an
image.
In upward projection, do
not tilt the projector over 10
degrees right and left.
In downward projection, do
not tilt the projector over 10
degrees right and left.
✔Note:
•To inverse or reverse the image, set the ceiling function to “On.” (pp. 45, 52)
•The projector can not be operated at an altitude above 3,000 meters.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
